The equipment maintenance and repair platform is mainly used for experiments and daily maintenance and repair of large equipment. The maintenance and repair locations are relatively fixed, and experimental maintenance is frequent.
This type of lifting platform usually has a large worktable and needs to carry multiple types of tools and personnel for operation.
There are safety guardrails around the platform to ensure the safety of workers.
The table can automatically expand and contract according to the requirements of the homework, expanding the working area.
The platform is equipped with stairs, making it convenient for workers to get on and off the workbench.
The elevator can be installed in a pit or above the ground, making it flexible and convenient to use.
The platform lifting process has low noise, strong force, simple and convenient maintenance, low maintenance cost, and long service life.
The elevator is equipped with overload alarm and overload protection devices to ensure the safe lifting and lowering of the platform.
The hydraulic system is equipped with explosion-proof valves to prevent the platform from falling due to oil pipe rupture.
The main body of the platform is made of structural steel, which has strong bearing capacity, safety and durability.
Design and produce according to user needs.
The equipment maintenance and repair lifting platform is widely used in key enterprises such as aerospace, aviation, power, metallurgy, railway, shipbuilding, and automobiles, providing a convenient platform for the testing, maintenance, and repair of important equipment in enterprises.
1、 Precautions
During installation and use of the platform, the workbench should be kept level.
2. During the lifting process of the platform, it is strictly prohibited for any personnel to climb. If maintenance is required, the platform should be lifted and then
The platform must be firmly secured before proceeding
3. Overloading operations are strictly prohibited during the use of the platform, and the items carried should be placed in the middle of the workbench surface
Heart position must not be moved or biased.
4. The hydraulic oil used should be kept clean and free from water and other impurities.
When the platform malfunctions, the power supply should be cut off in a timely manner for maintenance.
2、 Maintenance and upkeep
1. The elevator is a scissor lift, and its rotating part is connected by a shaft pin and a shaft sleeve. In order to reduce friction, there is a grease nipple at the end of the shaft pin for adding lubricating grease. The platform must be lubricated after 80 hours or about 10 days of use.
2. After adding hydraulic oil to the elevator every 200 hours of operation, about 6 months, replace the hydraulic oil with a viscosity of 22-46mm/s; Hydraulic oil with high viscosity is used in high temperature working environments, and it must be filtered when refueling. Hydraulic oil is generally N46 in summer and N32 in winter.
After working for 80 hours, about 10 days, it is necessary to inspect the screw cap on the pin for looseness. If there is any looseness, it should be dealt with urgently.
Our factory is spacious and bright, with excellent production equipment and imported production line equipment,Our leading products include over ten series, including high-altitude work platforms, hydraulic lifts, lifting platforms, boarding bridges, electric flatbed trucks, hedge trimmers, railway bridges, and car lifts. Jinli adopts a flexible production system to meet customers' special requirements for the design and production of lifting platforms. In the design and production departments of Jinli, we are able to quickly provide solutions for a series of special requirements raised by customers. Our products have been successfully applied in many industries such as aerospace, aviation, nuclear power, logistics, pharmaceuticals, railways, chemicals, and automobiles.
