The car lift runs smoothly and has a large worktable, generally used for maintenance and other operations of large cars. The lifting process has low noise, strong force, simple and convenient maintenance, low maintenance costs, and long service life. The elevator is installed in the pit, and when it descends to a low height, the workbench is level with the ground. The platform is equipped with overload alarm and overload protection devices to ensure safe lifting and lowering of the platform. The hydraulic system is equipped with explosion-proof valves to prevent the platform from falling due to oil pipe rupture. The main body of the platform is made of structural steel, which has strong bearing capacity, safety and durability. Equipped with safety devices such as balance valve, safety pressure holding, emergency stop, etc. It can achieve offline, on platform, and remote control of lifting and lowering according to user requirements.   Note: Can be designed and manufactured according to user requirements Applicable locations: Scissor type car lifts are mainly used in car 4S stores, car repair shops, three-dimensional parking garages, freight terminals and other places. Due to its simple structure and good synchronization, it is commonly used as a platform for four-wheel alignment devices. Scissor type car lifts are mainly used in car 4S stores, car repair shops, three-dimensional parking garages, freight terminals and other places. Due to its simple structure and good synchronization, it is commonly used as a platform for four-wheel alignment devices. Scissor lifts are divided into several types, such as large scissors (mother and child), small scissors (single scissors) lifts, and ultra-thin series scissor lifts. The small scissor lift is mainly used for car maintenance and repair, with high safety and easy operation. After digging the trench, level it with the ground. The large shear lift has a relatively large amount of water coming out, which is used in conjunction with four-wheel alignment equipment and can be used for car maintenance, tire and chassis inspection. It can be excavated or directly installed on the ground. The ultra-thin series scissor lift does not require digging grooves and is suitable for repair shops. Some floors are not suitable for installing two column lifts and ordinary four column lifts. However, this machine has a wide contact surface with the floor, so it can be installed on floors that can be driven, solving customer site problems. This type of machine will be the mainstream product in the future, and it will be widely used abroad. Product knowledge: 1、 Precautions During installation and use of the platform, the workbench should be kept level. 2. During the lifting process of the platform, it is strictly prohibited for any personnel to climb. If maintenance is required, the platform should be lifted and then The platform must be firmly secured before proceeding 3. Overloading operations are strictly prohibited during the use of the platform, and the items carried should be placed in the middle of the workbench surface Heart position must not be moved or biased. 4. The hydraulic oil used should be kept clean and free from water and other impurities. When the platform malfunctions, the power supply should be cut off in a timely manner for maintenance. 2、 Maintenance and upkeep 1. The elevator is a scissor lift, and its rotating part is connected by a shaft pin and a shaft sleeve. In order to reduce friction, there is a grease nipple at the end of the shaft pin for adding lubricating grease. The platform must be lubricated after 80 hours or about 10 days of use. 2. After adding hydraulic oil to the elevator every 200 hours of operation, about 6 months, replace the hydraulic oil with a viscosity of 22-46mm/S; Hydraulic oil with high viscosity is used in high temperature working environments, and it must be filtered when refueling. Hydraulic oil is generally N46 in summer and N32 in winter. After working for 80 hours, about 10 days, it is necessary to inspect the screw cap on the pin for looseness. If there is any looseness, it should be dealt with urgently. Our factory is spacious and bright, with excellent production equipment and imported production line equipment, Our leading products include over ten series, including high-altitude work platforms, hydraulic lifts, lifting platforms, boarding bridges, electric flatbed trucks, hedge trimmers, railway bridges, and car lifts. Jinli adopts a flexible production system to meet customers' special requirements for the design and production of lifting platforms. In the design and production departments of Jinli, we are able to quickly provide solutions for a series of special requirements raised by customers. Our products have been successfully applied in many industries such as aerospace, aviation, nuclear power, logistics, pharmaceuticals, railways, chemicals, and automobiles.

{27}{28}