Product Introduction 1、 Definition of Mobile Hydraulic Boarding Axle: Mobile boarding bridges are widely used in cargo platforms and mobile loading and unloading areas without loading and unloading equipment, and are auxiliary equipment for cargo loading and unloading used in conjunction with forklifts. With the help of mobile boarding bridges, forklifts can directly enter the interior of car containers for batch loading and unloading operations. Only single person operation is required, without the need for power supply, to achieve safe and fast loading and unloading of goods 2、 Introduction to Mobile Hydraulic Boarding Axle: Mobile boarding bridge is a sister product of fixed boarding bridge, mainly used in places with large freight volume such as stations, docks, factory warehouses, etc., but not convenient for making cargo platforms. It can build a bridge between the ground and transport vehicles, allowing forklifts to move on the ground and achieve the purpose of loading and unloading goods. One end of the equipment is in contact with the ground, and the other end is overlapped on the rear edge of the carriage. It can automatically adjust the height according to different vehicle types and changes in the carriage during the loading process, greatly improving work efficiency. The main body is welded with rectangular tubes, which have high strength and large bearing capacity; The hydraulic system adopts imported hand pressure pumps, which are safe and durable; The bridge deck is made of high-strength steel mesh, which increases the friction coefficient, facilitates forklift operation, reduces the weight of the bridge body, and makes movement more flexible. 3、 Applicable places: logistics and freight, various factories, warehouses, stations, docks, etc.   Note: Can be designed and manufactured according to user requirements It is mainly used in places with large freight volume such as stations, docks, logistics and freight factories warehouses, but not convenient for making cargo platforms. It can build a bridge between the ground and transport vehicles to allow forklifts to move on the ground and achieve the purpose of loading and unloading goods. One end of the equipment is in contact with the ground, and the other end is overlapped on the rear edge of the carriage. It can automatically adjust the height according to different vehicle types and changes in the carriage during the loading process, greatly improving work efficiency. The main body is welded with rectangular tubes, which have high strength and large bearing capacity; The hydraulic system adopts imported hand pressure pumps, which are safe and durable; The bridge deck is made of high-strength steel mesh, which increases the friction coefficient, facilitates forklift operation, reduces the weight of the bridge body, and makes movement more flexible. 1、 Instructions for using the mobile hydraulic boarding bridge: 1. Move the boarding bridge to the work site, close the shut-off valve of the manual pump, press the manual pump, and raise the bridge deck to the appropriate height (adjusted according to the vehicle model). 2. The truck slowly fell under the bridge (visually inspect that the tongue plate reinforcement does not interfere after falling). 3. Open the manual pump shut-off valve to allow the bridge deck to freely overlap with the carriage, and do not move the wheels to bear the load. 4. Put down the tailboard, lock the bridge and the vehicle body with the locking chain, and then proceed with the loading and unloading operation. .After finishing the work, release the hanging chain, press the manual pump to detach the bridge deck from the vehicle, and the truck will drive away. 6. Fold up the tailboard and remove the boarding bridge. 2、 Precautions for moving hydraulic boarding bridge: 1. Before loading and unloading goods, the chain must be tightened, otherwise work cannot be carried out. 2. Overloading is strictly prohibited. 3. During the forklift loading and unloading process, try to avoid unnecessary overloading to prevent damage to the bridge deck and body, which may cause danger. 4. During the work process, the manual pump shut-off valve must be opened to keep the tires in a stress free state. 3、 Daily maintenance of mobile hydraulic boarding bridge 1. For outdoor use, the surface must be repainted and rust proofed once a year& nbsp; 2. Hydraulic oil should be checked and replaced as necessary after 6 months of use; Add lubricating grease to the wheel axle and rotating parts every 1-3 months Our factory is spacious and bright, with excellent production equipment and imported production line equipment, Our leading products include over ten series, including high-altitude work platforms, hydraulic lifts, lifting platforms, boarding bridges, electric flatbed trucks, hedge trimmers, railway bridges, and car lifts. Jinli adopts a flexible production system to meet customers' special requirements for the design and production of lifting platforms. In the design and production departments of Jinli, we are able to quickly provide solutions for a series of special requirements raised by customers. Our products have been successfully applied in many industries such as aerospace, aviation, nuclear power, logistics, pharmaceuticals, railways, chemicals, and automobiles.

{24}{25}