Keywords: Car mounted scissor lift platform
The car mounted scissor lift platform is a portable lifting platform that is suitable for controlling ground road lights or for remote high-altitude operations. Below, the mechanical equipment website will provide a detailed introduction to the usage instructions of the car mounted scissor lift platform.
Car mounted scissor lift platform detailed introduction:
The lifting platform of the vehicle mounted hydraulic press adopts various types of vehicle chassis structure reinforcement platform support frames, and uses the driving force of the vehicle to output the driving force from the transmission to operate and control the gasoline pump.
No need for external power supply, easy to operate and control, convenient to move, strong controllability, and a wide range of work.
Shared instructions for using the car mounted scissor lift platform
Customers can use any vehicle series such as release, car wind, Jiangling Motors, Shenzhen Futian, electric vehicles, etc. according to regulations. The machinery and equipment can be selected from small cars, diesel engines, or battery powered elevators with immediate driving force.
The subject of the behavior uses high-quality structural steel and adopts double-sided welding and double-sided forming processing technology.
Choose imported electric hydraulic pumps or electric hydraulic pumps from Chinese joint ventures.
The lifting platform is equipped with static balance valves, safety pressure protection devices, and other safety devices, making the platform reliable and durable.
The protective fence is easy to dismantle, equipped with anti cracking safety devices for oil pipelines and emergency stop buttons, ensuring long-lasting safety.
Instructions for using the car mounted scissor lift platform
1. The vehicle mounted lifting platform has been tested and adjusted before the original factory, and all performance indicators exceed the design specifications. When applied, the hydraulic press and household appliance system software do not need to be adjusted.
2. Before application, the platform should carefully check that the hydraulic press and household appliance system software are not leaking or exposed before use.
3. When the platform is applied, the four legs should be firmly supported on a solid road surface, and wooden pillows can be used if necessary.
Shared instructions for using the car mounted scissor lift platform
4. The platform can only be loaded after 13 times of air transportation.
5. The center of gravity of the load should be located as close as possible to the management center of the control panel.
6. The moving doors on both sides of the safety barrier should be tightly closed and can only be put into operation after the death of the person.
7. The entire process of hydraulic transmission system operation (gu ò ch é ng): starting the power switch of the starting motor, motor rotation, oil filling of the gear oil pump, hydraulic cylinder extension, platform lifting; When the height to width ratio reaches the required working level, press the motor termination button to terminate the platform lift and start working. Lower, press the electromagnetic coil connection button. At this point, the hydraulic cylinder pump oil is connected, and the platform is lowered by weight. After reaching the initial position, turn off the electromagnetic coil.
The previous content is about the sharing of usage instructions for the car mounted scissor lift platform on the Mechanical Equipment Network. Do you have any other doubts? People's online platforms have also sorted out many materials related to the lift platform. If you want to master it, come and bookmark it now.
Lift platform
{22}
