& nbsp; When it comes to equipment bearings, it is actually difficult to pierce them into the shaft pins. However, sometimes, some people think of using a hammer to insert the bearings in order to facilitate the equipment. When using brute force during equipment, the hammer directly strikes the bearings, causing significant damage and reducing the service life of the bearings. So we must not exert excessive force on the bearings of the equipment. Before starting the equipment, place some soft cloth or cardboard on top.

  & nbsp; In the process of preparing the lifting platform bearing equipment, we cannot always ensure that the bearing equipment is in the correct orientation. It is inevitable that some equipment may not be in place or the bearings may be offset. Once these problems occur in the equipment, the clearance between the bearings will become too small.

  & nbsp; Then make sure that the inner and outer rings inside the bearing cannot be at the same center of rotation. So it is necessary to use specialized tools when installing bearings, and it is also necessary to use a testing instrument to check the bearings after they are installed, in order to ensure the success of the bearing equipment.

  & nbsp; Before preparing the bearings for the lifting platform of the equipment, we must not open the packaging in advance, as this can easily lead to premature contamination of the bearings, which can cause premature damage to the bearings. Additionally, it is important to ensure that the equipment environment is clean and avoid bringing iron filings, dust, and other substances into the bearings, as even small amounts of dust can affect the running in between the bearings over time and reduce the lifespan of the lifting platform.