Hydraulic lifting platforms are equipped with different support legs to accommodate different load conditions. Below, we will provide a detailed introduction to the classification of hydraulic lifting platform support legs. Common support legs for hydraulic lifting platforms include frog style support legs, H-shaped support legs, X-shaped support legs, radiation type support legs, swinging support legs, etc. Let's provide a detailed introduction one by one below. 1. Frog style leg support The theme activity of this type of leg is that the leg is twisted onto a fixed leg, and its posture is carried out by a hydraulic cylinder. Its characteristics are simple construction and light net weight, but the leg span is not large, only suitable for small tonnage lifting equipment. 2. H-shaped leg This type of support leg is not common in hydraulic lifting platforms, and there are two hydraulic cylinders. After extending the legs of the theme activity, it is famous for its vertical leg support on the ground during work, just like H. The characteristic is that the support legs have a large span and good adaptability to the environment. At present, they have been widely used (extended). 3. X-shaped support leg When working with this type of leg, the leg is X-shaped, and the indoor space for lifting objects is larger than that of H-shaped legs. Therefore, it is often mixed with H-shaped legs, resulting in a front H. The form of X. 4. Radiation type support legs Four support legs extend outward in a radiation pattern from the bowl shaped frame of the window frame, with the rotation center of the rotating workbench as the center. The characteristic is strong stability (expression: firm and stable; no change), which is key to use in some giant lifting equipment during lifting and hoisting work. 5. Swinging legs During lifting operations, these types of support legs will swing to a position perpendicular to the vertical centerline of the window frame under the action of hydraulic cylinders; When working flexibly, the legs should not be too long, so the spacing between the horizontal support points should be small. {13}

{1}

{2}

{3}

{4}

{5}

{6}

{7}

{8}

{9}

{10}

{11}

{12}

{13}