& nbsp; In order to ensure the safe use of the crane platform and in accordance with relevant regulations, safety operating procedures for the lifting platform have been formulated. It is necessary to equip the lifting platform with specialized operators who have received specialized training, passed exams, and hold certificates. It is necessary for the operator of the lifting platform to abide by the protection regulations of the mechanical equipment and start the lifting platform after conducting all inspections and protections.

  & nbsp; In order to ensure the safe use of the crane platform and in accordance with relevant regulations, safety operating procedures for the lifting platform have been formulated. It is necessary to equip the lifting platform with specialized operators who have received specialized training, passed exams, and hold certificates. It is necessary for elevator platform operators to repair mechanical equipment in accordance with relevant rules. After inspection and repair, the elevator platform can be started. They should check the operating range before starting the lifting flatbed, remove obstacles, and lift the platform W. The keel rotation and walking obstacles should be removed.

  & nbsp; Support is an important preparatory task for improving platform operation. Flat foundations should be selected, such as fragile or uneven foundations.

  & nbsp; The lifting platform generally starts from the lower arm, then the middle arm, and finally starts from the upper arm. During the rotation operation of the elevator platform, it is necessary to ensure that the tilting height of the boom can be salvaged, and the reversal should be slow. At the same time, pay attention to the spacing of the cutting arm platform to meet the safety requirements of the equipment.

  & nbsp; The operator of the work platform should wear a safety belt. When working in the charging area, the vehicle body should be grounded according to the rules, and the operation of the lifting platform should be carried out according to the instructions of the work controller. The head should follow the GB5085 standard signal and the rules of the lifting platform. Contactor operator. The signal needs to be clear and precise.